Audi A3 8P7 Cabriolet 2008-2013 - Fabric Convertible Top Mohair® Blue

1. What's in the box?
1 x Convertible top + rear glas window
1 x Installation manual in German with step by step pictures

2. What's not included
- Hood frame
- Tension cables
- Rubbers
- Glue 
- Tools 
- Headliner

3. Mohair®  A5.3M material properties
✔ Woven solution-dyed arcylic facing
✔ PET drill backing
✔ Thickness: 1.1mm

4. What tools do you need?
1 x Scissors
1 x Stanley knife
1 x Drilling machine
1 x Drill bit
1 x Marker
1 x Hammer
1 x Tacker / staple gun
75 x Stainless steel staples
1 x Medium Phillips screwdriver
1 x Ratchet set
1 x Prof-Fabri hood glue
1 x  Torx set
1 x Allen set

The place for such work is a heated garage or similar. The higher the temperature, the easier it is to install the new window without wrinkles. A new installed window should not be opened for at least 14 days. After that period it has reached it's final fit. If in doubt, consult a specialist for advice. 

All our rear windows are ready-made windows meaning they are as far as possible prepared for assembly. Sewing or specials tools are not required. The windows always fit on the original frame and have been laser cut. The seams are additionally sealed or welded. The rear windows are made of high-quality Renolite PVC.

Water leakage or wind noise
An incorrect fitted window can cause water leakage and also wind noise. The reasons for these may be, externally defective hood parts, incorrectly adjusted soft tops locks, incorrectly fitted rubber seals, and incorrectly adjusted top frame, incorrect top tension or incorrect adjusted side windows. 

If the problem arises in the middle range, the adjustment of the top frame is the problem. If there are problems in the rear area, it may be due to the rear windows or the hood frame adjustment. Of course, a combination of solutions is sometimes appropriate.